Texas Instruments TPS2053B Evaluation Module TPS2053BEVM-294 TPS2053BEVM-294 Datenbogen
Produktcode
TPS2053BEVM-294
www.ti.com
3.3
TPS20xxEVM-294 Bottom-Side Layout
4
EVM Setup
4.1
Recommended Test Equipment
4.2
Measuring Current Limit
EVM Setup
The following test equipment is recommended:
•
Two-channel storage oscilloscope
•
Current probe
•
Voltage probe
•
An adjustable power supply with a 2.7-V to 5.5-V output and a 5-A output current-limit.
•
Volt-ohm meter
•
A passive or active load capable of handling 5 A
The user should read the applicable data sheet before using the EVM.
shows the EVM test setup for measuring current limit. A single switch is enabled into a short
circuit for this measurement.
shows the current waveform for a TPS2053BEVM-294.
6
Three-Channel, Power-Distribution Switch EVM
SLVU232A – December 2007 – Revised March 2008