Техническая Спецификация для Texas Instruments TPS2053B Evaluation Module TPS2053BEVM-294 TPS2053BEVM-294
![Texas Instruments](https://files.manualsbrain.com/attachments/b46f99d826b2b0e0e5f558c5fb6483942eb9216b/common/fit/150/50/c15ea36eb1fb1cce99a3b94668675bfc78ce832d8d727d9a7bb51a125510/brand_logo.gif)
Модели
TPS2053BEVM-294
www.ti.com
3.3
TPS20xxEVM-294 Bottom-Side Layout
4
EVM Setup
4.1
Recommended Test Equipment
4.2
Measuring Current Limit
EVM Setup
The following test equipment is recommended:
•
Two-channel storage oscilloscope
•
Current probe
•
Voltage probe
•
An adjustable power supply with a 2.7-V to 5.5-V output and a 5-A output current-limit.
•
Volt-ohm meter
•
A passive or active load capable of handling 5 A
The user should read the applicable data sheet before using the EVM.
shows the EVM test setup for measuring current limit. A single switch is enabled into a short
circuit for this measurement.
shows the current waveform for a TPS2053BEVM-294.
6
Three-Channel, Power-Distribution Switch EVM
SLVU232A – December 2007 – Revised March 2008