Texas Instruments CC2650DK Benutzerhandbuch
AUX – Sensor Controller Registers
17.8.4.3 MCUCFG Register (Offset = 8h) [reset = X]
MCUCFG is shown in
and described in
MCU Configuration This register contains power management related bitfields for the MCU domain.
Figure 17-38. MCUCFG Register
31
30
29
28
27
26
25
24
RESERVED
R-X
23
22
21
20
19
18
17
16
RESERVED
VIRT_OFF
FIXED_WU_EN
R-X
R/W-X
R/W-X
15
14
13
12
11
10
9
8
RESERVED
R-X
7
6
5
4
3
2
1
0
RESERVED
SRAM_RET_EN
R-X
R/W-Fh
Table 17-59. MCUCFG Register Field Descriptions
Bit
Field
Type
Reset
Description
31-18
RESERVED
R
X
Software should not rely on the value of a reserved. Writing any
other value than the reset value may result in undefined behavior.
other value than the reset value may result in undefined behavior.
17
VIRT_OFF
R/W
X
Internal. Only to be used through TI provided API.
16
FIXED_WU_EN
R/W
X
Internal. Only to be used through TI provided API.
15-4
RESERVED
R
X
Software should not rely on the value of a reserved. Writing any
other value than the reset value may result in undefined behavior.
other value than the reset value may result in undefined behavior.
3-0
SRAM_RET_EN
R/W
Fh
MCU SRAM is partitioned into 4 banks . This register controls which
of the banks that has retention during MCU power off
of the banks that has retention during MCU power off
0h = Retention is disabled
1h = Retention on for SRAM:BANK0
3h = Retention on for SRAM:BANK0 and SRAM:BANK1
7h = Retention on for SRAM:BANK0, SRAM:BANK1 and
SRAM:BANK2
SRAM:BANK2
Fh = Retention on for all banks (SRAM:BANK0, SRAM:BANK1
,SRAM:BANK2 and SRAM:BANK3)
,SRAM:BANK2 and SRAM:BANK3)
1260
AUX – Sensor Controller with Digital and Analog Peripherals
SWCU117A – February 2015 – Revised March 2015
Copyright © 2015, Texas Instruments Incorporated