Texas Instruments CC2650DK Benutzerhandbuch
WUC
MCU
JTAG
Event Producers
(Peripherals)
AUX
Event bus
MCU Event Fabric
Figure 4-5. WUC Subscriber in AON Event Fabric
4.4.2.2
Real-Time Clock
The RTC has a programmable event, which can be configured in the [CTRL_EVENT_RTC] register, and a
fixed event with ID 46 (Channel 2 clear – from AUX).
fixed event with ID 46 (Channel 2 clear – from AUX).
4.4.2.3
MCU Event Fabric
Seven output event from the AON event fabric are routed as input to the MCU event fabric. These events
are:
are:
1. AON programmable 0
2. AON programmable 1
3. AON programmable 2
4. AON edge detect
5. AON SPIS RTX
6. AON SPIS CS
7. AON RTC
There are three programmable lines from which any of the input events from
can be chosen.
This can be set in the [CTRL_EVENT_MCU] register.
4.5
MCU Event Fabric
The MCU event fabric resides in the MCU power domain and routes signals between most of the
peripherals and different internal blocks. Only a few of the subscribers in the MCU event fabric are
described in this section. For more information on the remaining subscribers, refer to the specific
peripheral chapters for the appropriate consumer (peripheral) for that specific subscriber.
peripherals and different internal blocks. Only a few of the subscribers in the MCU event fabric are
described in this section. For more information on the remaining subscribers, refer to the specific
peripheral chapters for the appropriate consumer (peripheral) for that specific subscriber.
240
Interrupts and Events
SWCU117A – February 2015 – Revised March 2015
Copyright © 2015, Texas Instruments Incorporated