Texas Instruments XIO2213B Evaluation Module / Reference Design XIO2213BEVM XIO2213BEVM Datenbogen
Produktcode
XIO2213BEVM
SCPS210F – OCTOBER 2008 – REVISED MAY 2013
XIO2213B
PCI Express™ TO 1394b OHCI WITH 3-PORT PHY
Check for Samples:
1
Introduction
1.1
XIO2213B Features
123
Ports at 100M Bit/s, 200M Bit/s, 400M Bit/s, and
• Full ×1 PCI Express™ (PCIe) Throughput
800M Bit/s
• Fully Compliant With PCI Express Base
• Cable Ports Monitor Line Conditions for Active
Specification, Revision 1.1
Connection to Remote Node
• Utilizes 100-MHz Differential PCI Express
• Cable Power Presence Monitoring
Common Reference Clock or 125-MHz Single-
Ended Reference Clock
Ended Reference Clock
• EEPROM Configuration Support to Load Global
Unique ID for 1394 Fabric
• Fully Supports Provisions of IEEE Std P1394b-
2002
• Support for D1, D2, D3
hot
• Fully Compliant With Provisions of IEEE Std
• Active-State Link Power Management Saves
1394-1995 for a High-Performance Serial Bus
Power When Packet Activity on the PCI
and IEEE Std 1394a-2000
Express Link Is Idle, Using Both L0s and L1
States
States
• Fully Compliant With 1394 Open Host
Controller Interface (OHCI) Specification,
• Eight 3.3-V Multifunction General-Purpose I/O
Revision 1.1 and Revision 1.2 Draft
(GPIO) Terminals
• Three IEEE Std 1394b Fully Compliant Cable
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
OHCI-Lynx is a trademark of Texas Instruments.
3
PCI Express is a trademark of PCI-SIG.
PRODUCTION DATA information is current as of publication date. Products conform to
Copyright © 2008–2013, Texas Instruments Incorporated
specifications per the terms of the Texas Instruments standard warranty. Production
processing does not necessarily include testing of all parameters.
processing does not necessarily include testing of all parameters.