Texas Instruments BUF12800 Evaluation Module BUF12800EVM BUF12800EVM Datenbogen
Produktcode
BUF12800EVM
BUF12800EVM Hardware
3.2
Typical Hardware Connections
Setting up the BUF12800EVM hardware involves connecting the BUF12800 test board and the USB DIG
Platform together via a 25-pin DSUB connector and then applying power. The external connections may
be connected to the real-world system that the BUF12800 is to be incorporated into.
Platform together via a 25-pin DSUB connector and then applying power. The external connections may
be connected to the real-world system that the BUF12800 is to be incorporated into.
shows the
typical hardware connections.
Figure 5. Typical Hardware Connections for the BUF12800EVM
3.3
Connecting the Hardware
To connect the BUF12800 Test Board and the USB DIG Platform together, gently push on both sides of
the DSUB connectors. Note that the USB DIG Platform board has two DSUB connectors; either DSUB
connector may be used. Make sure that the two connectors are completely pushed together; loose
connections may cause intermittent operation.
the DSUB connectors. Note that the USB DIG Platform board has two DSUB connectors; either DSUB
connector may be used. Make sure that the two connectors are completely pushed together; loose
connections may cause intermittent operation.
6
BUF12800EVM Evaluation Board and Software Tutorial
SBOU116
–
September 2011
Copyright
©
2011, Texas Instruments Incorporated