HP Modular Cooling System G2 10642 G2 Expansion Rack AF026A#001 Merkblatt
Produktcode
AF026A#001
HP 10000 G2 Series
Rack
Rack
All HP rack-mountable products are designed to fit our industry-standard 19-inch wide racks. Racks and
rack-mountable components are typically described using "U" measurements. One "U" is 1.75" (44.45
mm) high.
rack-mountable components are typically described using "U" measurements. One "U" is 1.75" (44.45
mm) high.
The MCS G2 ships attached to a specially adapted 42U 10000 Series G2 rack 600mm wide
(10642). This sturdy, industrial-strength rack series offers the following features:
(10642). This sturdy, industrial-strength rack series offers the following features:
Universal - Accommodates all HP server platforms (ProLiant, BladeSystem, Integrity, HP 9000,
Alpha, StorageWorks,) in addition to select third party equipment.
Alpha, StorageWorks,) in addition to select third party equipment.
NOTE: MCS G2 does not support rx7xxx, rp7xxx, rp84xx, rx86xx servers, 10U and other 17U
servers.
servers.
Design - The doors on the HP 10000 G2 Series rack bayed to the MCS G2 unit are fitted with
carbonite insert mounted inside the front door and solid split rear doors to prevent air from
escaping to the environment and to reduce the noise level.
Load Capacity - The MCS G2 and the MCS G2 Expansion rack will accommodate up to 2000
lb. of equipment each in a static or dynamic environment. A static environment is one where the
rack is positioned into place and the leveling feet are extended prior to equipment being installed.
A dynamic environment is one where the rack is shipped on a shock pallet with equipment
installed or rolling racks with equipment installed to new locations within the data center.
Unique Frame and Rail Design - Enables fast assembly, easy mounting and outstanding structural
integrity. Equipment installation effort is dramatically reduced because the vertical mounting system
was specifically designed to minimize the time required to install HP products, and can be used
with many other non-HP products as well. U markings on the front and sides of rails make it easy to
align parts when installing equipment. Cut outs in the rails also allow for cabling between racks.
Security Provisions - Front and rear doors are lockable, which provides the necessary level of
security to prevent unauthorized entry. Side panels are also lockable* allowing for your entire rack
row to be secure
carbonite insert mounted inside the front door and solid split rear doors to prevent air from
escaping to the environment and to reduce the noise level.
Load Capacity - The MCS G2 and the MCS G2 Expansion rack will accommodate up to 2000
lb. of equipment each in a static or dynamic environment. A static environment is one where the
rack is positioned into place and the leveling feet are extended prior to equipment being installed.
A dynamic environment is one where the rack is shipped on a shock pallet with equipment
installed or rolling racks with equipment installed to new locations within the data center.
Unique Frame and Rail Design - Enables fast assembly, easy mounting and outstanding structural
integrity. Equipment installation effort is dramatically reduced because the vertical mounting system
was specifically designed to minimize the time required to install HP products, and can be used
with many other non-HP products as well. U markings on the front and sides of rails make it easy to
align parts when installing equipment. Cut outs in the rails also allow for cabling between racks.
Security Provisions - Front and rear doors are lockable, which provides the necessary level of
security to prevent unauthorized entry. Side panels are also lockable* allowing for your entire rack
row to be secure
HP MCS G2 Key Features
Cooling Capacity of up to 35kW - MCS G2 has been designed to support a full load of blade
servers in a single rack or 17.5kW per rack when deployed as a rack solution. The MCS G2 unit
will provide cool air distributed along the full height of the MCS G2 rack.
Power Input Redundancy - Automatically detects power failure and switches to alternate source.
Environmental Control and Safety - The MCS G2 features full environmental control of the cooled
air temperature being placed in front of the servers. The heat exchanger unit features safety quick
disconnect valves that prevent accidental chilled water leakage during service. A water leak
detector ships standard with the MCS G2. Alarms can be sent via SNMP traps to Systems Insight
Manager (SIM).
Hot-swappable components - Fans can be replaced while the unit is operating allowing for great
flexibility in servicing the MCS G2.
servers in a single rack or 17.5kW per rack when deployed as a rack solution. The MCS G2 unit
will provide cool air distributed along the full height of the MCS G2 rack.
Power Input Redundancy - Automatically detects power failure and switches to alternate source.
Environmental Control and Safety - The MCS G2 features full environmental control of the cooled
air temperature being placed in front of the servers. The heat exchanger unit features safety quick
disconnect valves that prevent accidental chilled water leakage during service. A water leak
detector ships standard with the MCS G2. Alarms can be sent via SNMP traps to Systems Insight
Manager (SIM).
Hot-swappable components - Fans can be replaced while the unit is operating allowing for great
flexibility in servicing the MCS G2.
Industry Standard Support
All rack products are 19 inch RETMA standard and will support select third-party equipment. For
additional rack information, please refer to the HP 10000 G2 Series rack QuickSpecs at:
additional rack information, please refer to the HP 10000 G2 Series rack QuickSpecs at:
QuickSpecs
HP Modular Cooling System G2
Standard Features
DA - 12919 Worldwide QuickSpecs — Version 5 — 10.9.2009
Page 5