Insys GSM Small 11-02-01-03-02.001 Benutzerhandbuch
Produktcode
11-02-01-03-02.001
24
5. Configuration Software HSComm
5.3 Serial
Interface
5.3.1 Baud Rate, Data Format and Echo
The settings of the serial interface of the INSYS GSM small must match the parameter
settings of the device to be connected.
This concerns the transmission rate (baud rate) and the data format (number of data
bits, number of stop bits, and parity).
Auto baud
When auto baud is set, the baud rate and the data format of the connected device is
automatically recognized when the first two received characters are “at” (e.g. for the
initialization string of a PLC). The auto baud function is only possible for transmission
rates of more than 600 baud.
Echo
With echo, all commands which are transmitted via the serial interface are returned to
allow local recording in terminal operation.
settings of the device to be connected.
This concerns the transmission rate (baud rate) and the data format (number of data
bits, number of stop bits, and parity).
Auto baud
When auto baud is set, the baud rate and the data format of the connected device is
automatically recognized when the first two received characters are “at” (e.g. for the
initialization string of a PLC). The auto baud function is only possible for transmission
rates of more than 600 baud.
Echo
With echo, all commands which are transmitted via the serial interface are returned to
allow local recording in terminal operation.
Version 1.00 / 09.04