Helios Preisser DIGI-MET® Instrument 1726 502 Reading range(s) 12.5 mm Reading 0,001 mm Accuracy 0,005 mm 1726 502 Datenbogen

6

 UsbCom Standard / Professional 2.1

©

 Software



 

In the parameter window the MC-I data cable (e.g. foot switch), or a measuring device; the defined measuring 
cycle will be reset to zero. See section 5.1 MC-I Switch and 5.2 Measuring Device.

 

Alternatively, the measuring cycle can also be reset by clicking the Reset button in the status window.

2.2 Previous
 
 

The highlighted field (marked grey) in the configuration window will move to the preceding measuring device 
e.g. from USB2 to USB1. The highlighted measuring device can then be edited.

 

The highlighted field (marked grey) in the configuration window will return to the following measuring device 
e.g. from USB 2 to USB 3. The highlighted measuring device can then be edited.

 Tip:  To edit a measuring device simply click on it.

 With 

Edit the parameter window of the aforementioned active and grey highlighted measuring device will 

open. Here the settings for the connected measuring device can be made. 

 Tip: The parameter window can also be opened with a double click on the image of the measuring device in 

the configuration window.

 

For test purposes a measuring value from a measuring device can be requestedwerden.

 

The USB port will be examined for a detached or a newly connected cable, additionally the configuration 
window will return to the last saved version.

 Attention: When the cable is either plugged in or out the configuration will automatically be refreshed! 

Amended settings and settings that have not been saved will be lost!