Helios Preisser DIGI-MET® Instrument 1726 502 Reading range(s) 12.5 mm Reading 0,001 mm Accuracy 0,005 mm 1726 502 Datenbogen
Produktcode
1726 502
7
UsbCom Standard / Professional 2.1
©
Software
3. Settings
3.1 Load (Only available with UsbCom Professional)
Here the previously saved configuration settings can be reloaded.
3.2 Save (Only available with UsbCom Professional)
The actual configuration settings will be saved under the actual opened file (e.g. DEFAULT.MCC).
Attention: previously saved configuration settings will be overwritten!
3.3 Save As (Only available with UsbCom Professional)
The actual configuration settings can also be saved under a different file name, therefore it is possible to save
and reuse multiple configuration settings.
and reuse multiple configuration settings.
Note: If the cable does not have a USB plug, which is required
for stored configuration, it will not be shown. If an additional cable is attached which is not for the stored
configuration, then this will be shown in its initial non-configured state.
configuration, then this will be shown in its initial non-configured state.