Helios Preisser DIGI-MET® Instrument 1726 502 Reading range(s) 12.5 mm Reading 0,001 mm Accuracy 0,005 mm 1726 502 Datenbogen
Produktcode
1726 502
11
UsbCom Standard / Professional 2.1
©
Software
5.2 Measuring Device
In this menu all the most important settings for each of the measuring devices can be administered.
•
Connection cable: Select the connected data cable (e.g. 16EXu or Opto Duplex). When connecting
the USB data cable, the cable will automatically be recognized and cannot be
edited.
•
Instrument:
Select the connected measuring device, the selected device will also be displayed
as a picture for easier recognition.
•
Description:
Enter an appropriate description of the connected measuring device (e.g. Caliper)
or the measurement task.
•
Data Request:
Select a data request, request measured values.
With „None“ the value must be send with the measuring device, for example with the Data button on the
data cable
data cable
.
Note:
Regardless of which data request has been selected the measured value can
always be send directly from the device!
If the window is a light grey, the contents cannot be selected and the connected measuring device will not
support request measured values. In this instance the measured value can be sent from the measuring
device (e.g. by pressing the DATA button).
support request measured values. In this instance the measured value can be sent from the measuring
device (e.g. by pressing the DATA button).