Ziehl MINIPAN 350 DC Digital measuring and switching device MINIPAN 350 DC 1 mV - 500 V/DC / 1 mA - 1 A D 890110.CO Datenbogen
Produktcode
D 890110.CO
date / name ) : 08.10.07 WL / Fu
Z. Nr.: 12180-0701-01
Page 5 of 12
Type: Minipan 350 V
ZIEHL industrie-elektronik GmbH + Co KG, Daimlerstr.13, D-74523 Schwäbisch Hall, Tel.: +49 791 504-0, Fax: -56, e-mail: info@ziehl.de
Setting of Parameters:
Decimal point behind last digit:
off
= display mode (measured values)
on
= menu mode, select the menu items
blinking
= parameter setting mode
Display Mode
Display of actual measured value.
Function buttons Up/Down
Function buttons Up/Down
Push short
Change to menu mode, selection of menu item
Push for > 2 s
Display of stored MIN- or MAX- values
Function of button Set /Reset
Push short
no function
Push for > 2 s
Reset of MIN- or MAX-value (with Min- or Max-button pushed
simultaneously)
Push for > 10 s
Display of software-version
Menu Mode
(Decimal point behind last digit ON)
Selection of the menu items for changing the parameters.
Function buttons Up/Down
Function buttons Up/Down
Push short
Selection of menu item; Change into display mode
Function Taste Set/Reset
Push short
Change into parameter setting mode
Parameter setting mode (Decimal point behind the last digit FLASHES)
Function buttons Up/Down
Push short/long
Adjustment of parameter value (slow/fast)
Function button Set/Reset
Push short
Push short
Storage of setting and choice of next parameter.
Change into menu mode after the last parameter
Parametrizing of Input / Measuring Range
Select menu item with Up/Down until display InPU and measuring range alternate.
Change into parametrizing mode with Set and select measuring range with Up/Down.
Confirm and change to next menu with Set.
When changing measuring range parameters for scaling the display are set to:
Change into parametrizing mode with Set and select measuring range with Up/Down.
Confirm and change to next menu with Set.
When changing measuring range parameters for scaling the display are set to:
InLo = 0%, InHi = 100 % of measuring range, diLi = 0, diHi = 5000 und dp = 0000.
Scaling the Display
Select menu item with Up/Down until display ScAL and mode (Auto or USEr) alternate.
Change into parametrizing mode with Set and select mode with Up/Down.
Change into parametrizing mode with Set and select mode with Up/Down.
Auto: Display = measured signal without scaling.
USEr: Range of input-signal and range of display can be set by the user. The range of the
input-signal must be within the measuring range.
USEr: Range of input-signal and range of display can be set by the user. The range of the
input-signal must be within the measuring range.