Nilfisk Alto Pressure washers NEPTUNE 1-22 107145000 107145000 Datenbogen

7

1)

 Options / model variants

Original instruction

NEPTUNE 1, NEPTUNE 2

NEPTUNE 2 Special

Before connecting devices with 
voltage changeover

1)

: Check that 

the pre-selected voltage on the 
machine corresponds with the 
voltage of the electrical instal-
lation. Otherwise the electrical 

devices of the machine can be 
destroyed.
CAUTION!
When using cable reels:
1.  Due to the risk of overheat-

ing and fire, always unwind 
the power supply cord fully.

The cleaner may only be con-
nected to a correctly installed 
electrical installation.

1.  Observe safety instructions in 

chapter 1.

2.  Put the plug into the electrical 

socket.

The machine is protected with 
anti-freeze from the factory. 

1. Move the main switch into 

position 'Cold Water' (A)

The control electronics sys-
tem performs a self-test, all the 
LEDs light up once.
The motor starts

 lights up.

2.  Ventilate the machine for air 

by activating the spray gun

3. When the water flow is even, 

continue with the following 
steps

A

C

B

1. Pull the blue quick-release 

grip (A) of the spray gun 
backwards.

2.  Insert the nipple of the spray 

lance (B) into the quick-
release connection and re-
lease it.

3.  Pull the spray lance (or other 

accessory) forwards to check 
that it is securely attached to 
the spray gun.

Catch the liquid discharging  at 
first (approx. 5 l) for re-use in a 
container.