AEG BMG 5612 520612 Benutzerhandbuch

LCD Display shows
“EE”

The cuff was not properly ap-
plied or the rubber tube was 
bent or pressed.

Review the cuff applying and test-
ing sections of the instructions and 
re-test.

LCD Display shows
abnormal result

The cuff position was not 
correct or it was not properly 
tightened

Apply the cuff correctly and try 
again

Body posture was not correct 
during testing

Review the body posture and 
testing sections of the instructions 
and re-test.

Speaking, arm or body 
movement, angry, excited or 
nervous during testing

Re-test when calm and without 
speaking or moving during the test

No response when 
you press button or 
load battery

Incorrect operation, or strong 
electromagnetic interference

Take out batteries for five minutes, 
and then reinstall all batteries.

1. 

 Do not drop this monitor nor subject it to strong impacts. 

2. 

 Avoid high temperatures and direct sunlight. Do not immerse the monitor in water 

as this will result in damage to the monitor. 

3.  If this monitor was stored at a temperature near the freezing point, allow it to come to 

room temperature before use. 

4. 

 Do not attempt to disassemble this monitor. 

5.  If you do not use the monitor for a long time, please remove the batteries. 
6.  It is recommended the performance should be checked every 2 years or after repair. 

Please contact the service center. 

7.  Clean the monitor with a dry, soft cloth or a soft cloth squeezed well after moistened 

with water, diluted disinfectant alcohol, or diluted soapsuds. 

8.  No component in the monitor can be serviced by the user. The circuit diagrams, 

component part lists, descriptions, calibration instructions, or other information which 
will assist the user’s appropriately qualified technical personnel to repair those parts of 
equipment which are designated repairably can be supplied. 

9.  The monitor can maintain the safety and performance characteristics for a minimum