Mikroelektronika MikroE Development Kits MIKROE-1424 Datenbogen
Produktcode
MIKROE-1424
1. Introduction
Once you have soldered the headers your
board is ready to be placed into desired
mikroBUS™ socket. Make sure to align the
cut in the lower-right part of the board
with the markings on the silkscreen at the
mikroBUS™ socket. If all of the pins are
board is ready to be placed into desired
mikroBUS™ socket. Make sure to align the
cut in the lower-right part of the board
with the markings on the silkscreen at the
mikroBUS™ socket. If all of the pins are
aligned correctly, push the board all
the way into the socket.
3. Plugging the board in
2
3
2. Soldering the headers
1
4. Essential features
Turn the board upward again. Make sure
to align the headers so that they are
perpendicular to the board, then solder the
pins carefully.
to align the headers so that they are
perpendicular to the board, then solder the
pins carefully.
Turn the board upside down so that
bottom side is facing you upwards. Place
shorter parts of the header pins in both
soldering pad locations.
bottom side is facing you upwards. Place
shorter parts of the header pins in both
soldering pad locations.
Before using your click board™, make sure
to solder 1x8 male headers to both left
and right side of the board. Two 1x8 male
headers are included with the board in
the package.
to solder 1x8 male headers to both left
and right side of the board. Two 1x8 male
headers are included with the board in
the package.
click
BOARD
www.mikroe.com
Light click Manual
ver. 1.01
0 100000 023761
Light Click
™
is an accessory board in
mikroBUS
™
form factor. It’s a compact
and easy solution for adding light sensor
to your design. It features
to your design. It features
PD15-22C-
TR8
PIN photodiode,
MAX6106
voltage
reference and
MCP3201
ADC with SPI
interface. Light Click
™
communicates
with the target board microcontroller via
mikroBUS
™
SPI (MISO, SCK, CS) and AN
lines. The board is designed to use 3.3V
and 5V power supply. LED diode (GREEN)
indicates the presence of power supply.
and 5V power supply. LED diode (GREEN)
indicates the presence of power supply.
Light
click
Light Click™ with it’s
PD15-22C-TR8
and
MCP3201
ICs is a high photosensitive
light sensor with fast response time. The
board is capable of measuring ambient light
intensity and provides a signal (analog or
digital) to the main board microcontroller.
All these features make this board ideal for
high speed photo detector, copier, game
machine and many more.
board is capable of measuring ambient light
intensity and provides a signal (analog or
digital) to the main board microcontroller.
All these features make this board ideal for
high speed photo detector, copier, game
machine and many more.