Renkforce 3D printer RF1000 Single extruder (value.974113) RF1000 Datenbogen

(1)  Click “Expert”.
(2)  Select “Switch to quick print...”

The software interface is now simplified and only very few settings need to be made before printing.
This  surface  is  ideal  for  producing  the  first  test  prints  and  familiarising  yourself  with  the  software  settings  and  the  resulting

changes.

 In  Quickprint  mode,  start  and  end  G-Codes  or  Z-calibration  are  not  supported.  These  settings  are,  ho-

wever  available  in  expert  mode  (for  more  information,  see  the  instructions  and  the  forum  under

www.ultimaker.com).

Try printing the object already on the software printing plate with different settings and inspect the different results.
Find some information on the possible settings enclosed:

(1)  Selection of the printing quality (the higher, the slower the print)
(2)  Selection of the filament material and filament diameter
(3)  With the field activated, supporting structures are printed as well (required when printing out with overhangs, e.g. for

bridges)

(4)  Loading 3D files to be printed
(5)  Start the printing process
(6)  Selection of view options