Siemens SPS starter kit 6ED1057-3BA00-0AA8 12 Vdc, 24 Vdc 6ED1057-3BA00-0AA8 Datenbogen
Produktcode
6ED1057-3BA00-0AA8
Reference material
5.3 Special functions
LOGO!Soft Comfort Online Help
328
Operating Instructions, 06/2014
Description of the function
With a 0 to 1 transition of the signal at input En, the display outputs your configured message
text (actual value, text, TOD, date) in RUN mode.
Acknowledgement disabled (Ack = Off):
The message text is hidden with a 0 to 1 signal transition at input En.
Acknowledgement enabled (Ack = On):
After input En is reset to 0, the message text is displayed until acknowledged by pressing the
Acknowledgement disabled (Ack = Off):
The message text is hidden with a 0 to 1 signal transition at input En.
Acknowledgement enabled (Ack = On):
After input En is reset to 0, the message text is displayed until acknowledged by pressing the
OK button. The message text cannot be acknowledged as long as input En is high.
If several message text functions were triggered with En=1, the message with the highest
If several message text functions were triggered with En=1, the message with the highest
priority (0 = lowest, 30 = highest) is displayed. This also implies that a new message text is
only displayed if its priority is higher than that of previously enabled message texts.
After a message text is disabled or acknowledged, the function automatically shows the
After a message text is disabled or acknowledged, the function automatically shows the
previously active message text that takes the highest priority.
You can change between the display in RUN mode and the message texts by means of the
You can change between the display in RUN mode and the message texts by means of the
and buttons.
Restrictions
Up to ten message text functions are available.