Auerswald COMfortel WS-650 IP 90150 Benutzerhandbuch

Spectralink IP-DECT Server 6500 Installation and Configuration Guide

14215700 Version 3.0
June, 2013

26

Resetting the Spectralink Base Station Hardware

The following table contains a description of the different actions that take place when pressing 
the Reset button.

The base station is suitable for mounting indoors on a wall.

For best RF coverage, the base station must be mounted vertically on walls. The antennas must 
always be kept perpendicular to the floor. 

Short press (2 to 5 sec.)

System restarts when button is 
released.

Long press (5 to 9 sec.) until 
front LED flashes red, then 
release button

Resets the system to factory default 
settings (original IP settings (DHCP) 
and empty user data base) and 
restarts the system.
Firmware version is not affected.

 

Before you begin the installation, determine the position of the base station for best coverage. 
The coverage depends on the construction of the building, architecture, and the choice of 
building materials.

 

The base station must not be installed at any angle other than vertical.

 

Do not mount the base station on soft surfaced walls such as those covered with canvas, metal 
or sponge-like materials