Auerswald COMfortel WS-650 IP 90150 Benutzerhandbuch

Spectralink IP-DECT Server 6500 Installation and Configuration Guide

14215700 Version 3.0
June, 2013

28

Chapter 5: Installing Spectralink Repeater

This section provides information about the repeater and how to unpack and install it. Installing 
repeaters requires a software installation as well as a hardware installation.

Before you install the equipment, ensure that a site planner defines the location of the repeaters.

For outdoor installations, the following items should be present in every box containing a 
Spectralink Repeater:

Spectralink Repeater

Mounting template for indoors installation

Two mounting screws and anchorsi

The Spectralink Repeater is a building block to be used to extend the coverage area in a 
Spectralink solution. The repeater does not increase the number of traffic channels, however it 
provides a larger physical spreading of the traffic channels and thereby increases the coverage 
area established with the Spectralink Base Stations.The repeaters are mainly used in areas with 
limited traffic. 

The Spectralink Repeater is available with either 2 or 4 voice channels. It is wireless and does not 
need physical connection to the Spectralink Wireless Server, which makes it easy to install. The 
repeaters can be supplied with an external antenna making it possible to create radio coverage in 
a remote area without cabling to the rest of the installation.

The RF communication is provided according to the band standard at the site:

 

For outdoor installations you need to mount the Spectralink Repeater in spots to prevent 
influenze from wether conditions.

The repeater is also termed by some manufacturers as the WRFP (Wireless Radio Fixed Part).