Auerswald COMfortel WS-650 IP 90150 Benutzerhandbuch

Produktcode

90150

Spectralink IP-DECT Server 6500 Installation and Configuration Guide

14215700 Version 3.0
June, 2013

Note: The external antenna used for the transmitter is to be fixed-mounted on indoor permanent

structures providing a separation distance of at least 20 cm / 8 inches from all persons during normal

operation and must not be co-located or operating in conjunction with any other antenna or transmitter.

The maximum radiated output power is 1W e.i.r.p. For more information and technical support, please

refer to www.Spectralink.com.

Recording the Installation Information

After completing the installation of the repeaters, record the location of each repeater.

Checking Indicators

Verify that the repeater LED indicator is continuously on, indicating that the repeater is functional.

Powering the Spectralink Repeater

Power Options

The power supply for the repeater is 9VDC, 300mA.

Programming with the Spectralink Programming Kit

This section describes how you program the Spectralink Repeater.

Content of the Spectralink Programming Kit Repeater

The Programming Kit Repeater (Part no. 02319508) consists of a splitter and a serial cable.

Note

For programming the repeater you also need the programming software (ServiceTool) and the
power supply for the repeater. The ServiceTool is not part of the Programming Kit Repeater
but can be downloaded from www.Spectralink.com. The power supply for the repeater is to be
ordered separately (Part no. 84642602).