Auerswald COMfortel WS-650 IP 90150 Benutzerhandbuch

Spectralink IP-DECT Server 6500 Installation and Configuration Guide

14215700 Version 3.0
June, 2013

35

The ServiceTool is the tool you access from your desktop and use for repeater programming, 
handset adjustment and software download to the handset and repeater.

The ServiceTool identifies the type of repeater, and with this software it is possible to program the 
Spectralink Repeater to connect to the Spectralink DECT Radio Infrastructure solutions.

Before you start programming the repeater, ensure that the repeater is connected to the computer 
and the mains.

In a multi cell solution, the numbering of the base stations and repeaters has to follow the 
numbering in 

Repeater and base station numbers must not be the same. Neither can the repeater have a 
number similar to another base station or another repeater in a situation where common 
overlap is present between the actual units (Numbers with red colour show where numbering 
could be identical between different units). If this occurs, handover between the different units 
is not possible.

First repeater

No. of base station + 64
Base to synchronize on: Number of base station

Second repeater

No. of base station + 128
Base to synchronize on: Number of base station

Third repeater

No. of base station + 192
Base to synchronize on: Number of base station

First repeater in chain

No. of base station + 64
Base to synchronize on: Number of base station

Second repeater in chain

No. of base station + 128
Base to synchronize on: Number of previous repeater

Third repeater in chain

No. of base station + 192
Base to synchronize on: Number of previous repeater

For programming the repeater you also need the programming software (ServiceTool) and the 
power supply for the repeater. The ServiceTool is not part of the Programming Kit Repeater 
but can be downloaded from www.Spectralink.com. The power supply for the repeater is to be 
ordered separately (Part no. 84642602).