Auerswald COMfortel WS-650 IP 90150 Benutzerhandbuch

Spectralink IP-DECT Server 6500 Installation and Configuration Guide

14215700 Version 3.0
June, 2013

36

For more information about programming the repeater with the ServiceTool, refer to the Help File 
in the ServiceTool. The ServiceTool is to be downloaded from www.spectralink.com.

If radio coverage between a base station and a repeater is not needed, it is possible to 
synchronize between the radio units using a repeater with external antenna.

The distance from the repeaters without external antenna to the base station must correspond to 
a RSSI loss of maximum 25dB.

Be aware that inside the area named “radio link” there is no radio coverage, and therefore a 
wireless handset cannot be used in this area.

The distance between the base station and the repeater with external antenna depends on the 
type of antenna used as well as on the signal attenuation created by surroundings such as 
buildings, trees, etc.

The repeater with external antenna, 4 channels, can be programmed to obtain synchronization on 
two radio units (base station or repeater).

If a situation occurs where the primary sync for some reason breaks down, the repeater will obtain 
sync on the alternative sync.

Be aware that the primary sync has priority; the alternative sync is only in use as long as the 
primary sync is down.

For programming the repeater you also need the programming software (ServiceTool) and the 
power supply for the repeater. The ServiceTool is not part of the Programming Kit Repeater 
but can be downloaded from www.Spectralink.com. The power supply for the repeater is to be 
ordered separately (Part no. 84642602).

Base 

Radio Link

Use of Spectralink 
Repeaters without 

Use of Spectralink