Fujitsu ESPRIMO P7935 VFY:P7935PXD31IT Datenbogen
Produktcode
VFY:P7935PXD31IT
A26361-K1006-Z220-1-7619, edition 2
3
Important notes
In this chapter you will find information regarding safety which it is essential to take note of when
working with your device.
working with your device.
Safety notes
!
Pay attention to the information provided in the "Safety" manual and in the following safety
notes.
During installing and operating the device, please observe the instructions on
environmental conditions in the "
notes.
During installing and operating the device, please observe the instructions on
environmental conditions in the "
X
Technical data
X
" chapter as well as the instructions in the
"
X
Preparing for use
X
" chapter.
You may only operate the device, if the rated voltage for the device is set to the local
mains voltage. Check the rated voltage set for this device (see "
mains voltage. Check the rated voltage set for this device (see "
X
Preparing for use
X
").
The main switch and the ON/OFF switch do not disconnect the device from the mains
voltage. To completely disconnect the mains voltage, remove the power plug from the
power socket.
Replace the lithium battery on the mainboard in accordance with the instructions in the
"
voltage. To completely disconnect the mains voltage, remove the power plug from the
power socket.
Replace the lithium battery on the mainboard in accordance with the instructions in the
"
X
Replacing the lithium battery
X
" chapter.
Transporting the device
!
Transport all parts separately in their original packaging or in a packaging which protects
them from knocks and jolts, to the new site. Do not unpack them until all transportation
manoeuvres are completed.
them from knocks and jolts, to the new site. Do not unpack them until all transportation
manoeuvres are completed.
Cleaning the device
!
Turn off all power and equipment switches and disconnect the power plug from the mains
outlet.
Do not clean any interior parts yourself, leave this job to a service technician.
Do not use any cleaning agents that contain abrasives or may corrode plastic.
Ensure that no liquid enters the system.
outlet.
Do not clean any interior parts yourself, leave this job to a service technician.
Do not use any cleaning agents that contain abrasives or may corrode plastic.
Ensure that no liquid enters the system.
Wipe the casing with a dry cloth. If particularly dirty, use a cloth that has been moistened in mild
domestic detergent and then carefully wrung out. Use disinfectant wipes to clean the keyboard and
the mouse.
domestic detergent and then carefully wrung out. Use disinfectant wipes to clean the keyboard and
the mouse.