Fujitsu ESPRIMO P7935 VFY:P7935PXD31IT Hoja De Datos

  

A26361-K1006-Z220-1-7619, edition 2 

3 

In this chapter you will find information regarding safety which it is essential to take note of when 
working with your device. 

 

Pay attention to the information provided in the "Safety" manual and in the following safety 
notes. 
During installing and operating the device, please observe the instructions on 
environmental conditions in the "

X

Technical data

X

" chapter as well as the instructions in the 

"

X

Preparing for use

X

" chapter. 

You may only operate the device, if the rated voltage for the device is set to the local 
mains voltage. Check the rated voltage set for this device (see "

X

Preparing for use

X

"). 

The main switch and the ON/OFF switch do not disconnect the device from the mains 
voltage. To completely disconnect the mains voltage, remove the power plug from the 
power socket. 
Replace the lithium battery on the mainboard in accordance with the instructions in the 
"

X

Replacing the lithium battery

X

" chapter. 

 

 

Transport all parts separately in their original packaging or in a packaging which protects 
them from knocks and jolts, to the new site. Do not unpack them until all transportation 
manoeuvres are completed. 

 

Turn off all power and equipment switches and disconnect the power plug from the mains 
outlet. 
Do not clean any interior parts yourself, leave this job to a service technician. 
Do not use any cleaning agents that contain abrasives or may corrode plastic. 
Ensure that no liquid enters the system. 

 

Wipe the casing with a dry cloth. If particularly dirty, use a cloth that has been moistened in mild 
domestic detergent and then carefully wrung out. Use disinfectant wipes to clean the keyboard and 
the mouse.