Emag EMMI 20HC 2l Ultrasonic Cleaner 230 x 115 x 75 mm EMMI 20HC Datenbogen
Produktcode
EMMI 20HC
1. Description
1. Lid
3. Stainless steel tank
5. ON/OFF
7. Temperature switch
2. Basket
4. Mains cable
6. Digital timer
2. Technical Information
Characteristics
Emmi 20 – 2,0 Litre
Emmi 30 – 3,0 Litre
Emmi 40 – 4,0 Litre
Height (mm)
220
240
240
Width (mm)
150
165
180
Length (mm)
260
265
325
Volume (L)
2,0
3.0
4.0
Tank (WxDxH) (mm)
230 x 120 x 80
240 x 135 x 100
300 x 155 x 100
Main source (V)
230/50 HZ
230/50 HZ
230/50 HZ
Classification
IP 20
IP 20
IP 20
Max. wattage
100 W
150 W
200 W
Ultrasonic transducers
2 (app. 38kHz)
3 (app. 38kHz)
4 ( appr.38kHz)
2004/D
Technical changes reserved!
3. Important Notes
• The ultrasonic cleaner must only be operated with the main source voltage printed on the nameplate
(rear of the casing). ( In earthed socket outlet.)
• Do not fill combustive or aggressive chemical agents (acids etc.) directly into the tank. Use glass
containers instead.
• Do not put your hands into the cleansing liquid during the process of ultrasonic cleaning.
• In the case of transport damages do not connect unit to power system.
• Do not use ultrasonic cleaner to clean animals or part of the human body (fingernails etc.)
• Do not remain in the immediate vicinity (1 m) for longer than 4 hours.
• If objects are heavily soiled, place them soiled side down into the liquid and do not stack them.
• The ultrasonic cleaner only must be operated with a sufficient amount of water (approximately
three-quarter filling of the tank, i.e. approximately 1-2 cm measured from the upper rim of the
tank).
tank).
It is absolutely normal that the upper rims of the tank warm up after a longer period of operation.