Emag EMMI 20HC 2l Ultrasonic Cleaner 230 x 115 x 75 mm EMMI 20HC Datenbogen
Produktcode
EMMI 20HC
6. Recommended additives
For each different cleaning process there is a different chemical additive to intensify the cleaning effect.
These additives are available at the site where you purchased your Emmi Ultrasonic Cleaner or under
For each different cleaning process there is a different chemical additive to intensify the cleaning effect.
These additives are available at the site where you purchased your Emmi Ultrasonic Cleaner or under
http://www.emag-germany.de
.
EMAG AG recommends the following concentrations depending on the intended utilization:
EM 070 – for dental purposes and to clean dentures at home.
EM 080 – to clean jewels (such as precious stones, emeralds, pearls).
EM 070 – for dental purposes and to clean dentures at home.
EM 080 – to clean jewels (such as precious stones, emeralds, pearls).
for spectacles, optical glasses, Indian ink pens, spherical heads,
small tools and instruments as well as for small precision parts,
shear heads of electric razors, (not to be used for contact lenses).
small tools and instruments as well as for small precision parts,
shear heads of electric razors, (not to be used for contact lenses).
EM 081 – for parts of weapons and for particularly greasy objects.
EM 100 – concentration to remove oxidizing from silver, etc. (only to be used in glass cup).
EM 200 – Descoton-Forte, concentrated disinfectant for instruments, etc. (to be used without heater).
EM 300 Super Plus – Extreme cleaning for difficult cases (holders, hinges, wheel bearings,
EM 100 – concentration to remove oxidizing from silver, etc. (only to be used in glass cup).
EM 200 – Descoton-Forte, concentrated disinfectant for instruments, etc. (to be used without heater).
EM 300 Super Plus – Extreme cleaning for difficult cases (holders, hinges, wheel bearings,
parts of weapons, cases, brass, etc.)
EM303 – to clean circuit boards (printed circuit boards)
EM404 – to clean cast aluminium ( carburator etc.)
If cleaning additives by other manufacturers have been used we do not take any responsibility for the
parts cleaned in ultrasonic cleaning bath. Please do not hesitate to contact us for more detailed
information.
EM404 – to clean cast aluminium ( carburator etc.)
If cleaning additives by other manufacturers have been used we do not take any responsibility for the
parts cleaned in ultrasonic cleaning bath. Please do not hesitate to contact us for more detailed
information.
7. Warranty
This product is warranted for a period of 24 months from the date of purchase.
Defects occurring during the period of warranty, whether due to faulty material or due to faulty
manufacture, will be remedied free of cost either by repair or by replacement. Additional claims for
compensation are excluded as far as legally valid.
The warranty becomes void if third parties are involved i.e. if third parties disassemble the unit without
prior explicit consent by us. In the case of intentional damaging or faulty operation the warranty also
becomes void
In the case of service under warranty conditions, the entire period of warranty is not extended.
In the case of unjustified reclamations such as faulty installation or operation, we reserve ourselves the
right to bring the corresponding costs to account.
For any claim under this warranty it is absolutely necessary to keep the sales slip with date of the
purchase.
To expedite any claim under guarantee please disregard the specialized trade and mail post paid
directly to:
EMAG AG , Service Center , Gerauerstr. 34 , D-64546 Mörfelden-Walldorf
Defects occurring during the period of warranty, whether due to faulty material or due to faulty
manufacture, will be remedied free of cost either by repair or by replacement. Additional claims for
compensation are excluded as far as legally valid.
The warranty becomes void if third parties are involved i.e. if third parties disassemble the unit without
prior explicit consent by us. In the case of intentional damaging or faulty operation the warranty also
becomes void
In the case of service under warranty conditions, the entire period of warranty is not extended.
In the case of unjustified reclamations such as faulty installation or operation, we reserve ourselves the
right to bring the corresponding costs to account.
For any claim under this warranty it is absolutely necessary to keep the sales slip with date of the
purchase.
To expedite any claim under guarantee please disregard the specialized trade and mail post paid
directly to:
EMAG AG , Service Center , Gerauerstr. 34 , D-64546 Mörfelden-Walldorf
Tel.: 06105-406 700 Fax.: 06105-406 750
http://www.emag-germany.de
Stamp of the seller: Date:
subject to changes