Pizzato Elettrica HC LL Hingesswitches Series PALLADIO Joint hinges without short switch contacts. - HC LL Datenbogen
Produktcode
HC LL
HP-HC series Switches
page 2
Dimensional drawings
Main data
Metal housing, cable output from bottom, from top or from back
4 integrated cable types available
Versions with M12 connector
Adjustable operating point
Protection degree IP67 and IP69K
9 contact blocks with positive opening
Complementary hinges without contacts
Versions with variations of the activation base angle
Operating point regulation
The switches operating point can be
regulated through a simple Phillips
screwdriver.
The operating point regulation allows
the setting possibility (up to 4°) for
large guards.
After the setting, it’s always neces-
sary to close the hole through the
suitable supplied safety seal plug.
regulated through a simple Phillips
screwdriver.
The operating point regulation allows
the setting possibility (up to 4°) for
large guards.
After the setting, it’s always neces-
sary to close the hole through the
suitable supplied safety seal plug.
M12 integrated connector version
Versions with connections from the
top or the bottom are available with
M12 integrated connector.
The application of versions with con-
nectors allows a faster wiring when
it’s necessary to move guards from
test line to fi nal user.
top or the bottom are available with
M12 integrated connector.
The application of versions with con-
nectors allows a faster wiring when
it’s necessary to move guards from
test line to fi nal user.
Opening angle up to 180°
The mechanical design of the switch
allows the application also onto
protections up to 180° opening
angle.
allows the application also onto
protections up to 180° opening
angle.
Application fi eld
Pizzato Elettrica widens its own range of products making a new
series of safety switches hinge-shaped, where safety and style are
melted in one single product.
The switch is completely integrated in the mechanical hinge, to result
practically invisible to an inexpert eye. This guarantees a higher safety
because a switch hard to identify is consequently also more diffi cult
to defeat. The assembly without visible screws and the pleasant line,
make the switch perfectly integrated also with guards of modern
design machinery.
In order to complete the offer complementary hinges with purely
mechanics functions are available.
series of safety switches hinge-shaped, where safety and style are
melted in one single product.
The switch is completely integrated in the mechanical hinge, to result
practically invisible to an inexpert eye. This guarantees a higher safety
because a switch hard to identify is consequently also more diffi cult
to defeat. The assembly without visible screws and the pleasant line,
make the switch perfectly integrated also with guards of modern
design machinery.
In order to complete the offer complementary hinges with purely
mechanics functions are available.
INNOVATION & DESIGN AWARD
This product has been presented
at the “Innovation & Design award
2007” which selects, among all in-
dustrial products, those that stand
out for technological innovation and
their particular design.
The switch has been selected by the
jury in category “Innovation “ during
the fair “Enermotive 2007”.
at the “Innovation & Design award
2007” which selects, among all in-
dustrial products, those that stand
out for technological innovation and
their particular design.
The switch has been selected by the
jury in category “Innovation “ during
the fair “Enermotive 2007”.
Variations of the activation base angle
New versions with the switch activa-
tion angle equal to a multiple of 15°
(e.g. 45° or 90°) are available on re-
quest.
The different activation angle does
not invalidate the possibility to ad-
just the operating point through the
switch adjusting screws.
The variation of the operating angle
does not alter the switch maximum
mechanical travel.
tion angle equal to a multiple of 15°
(e.g. 45° or 90°) are available on re-
quest.
The different activation angle does
not invalidate the possibility to ad-
just the operating point through the
switch adjusting screws.
The variation of the operating angle
does not alter the switch maximum
mechanical travel.
Versions for glass or polycarbonate doors
It’s available a variation of the switch
shape specifi cally designed for glass and
polycarbonate doors without frame. The
wider supporting arm and the spaced
fi xing points facilitate the installation and
prevent the cracking caused by holes too
near the guard edge.
However, it is necessary to verify that the
door mechanical stop is not performed by
the switch.
shape specifi cally designed for glass and
polycarbonate doors without frame. The
wider supporting arm and the spaced
fi xing points facilitate the installation and
prevent the cracking caused by holes too
near the guard edge.
However, it is necessary to verify that the
door mechanical stop is not performed by
the switch.
HP AA version
with cable from bottom
HP AA version
with cable from back
HP AA version with M12 con-
nector from bottom version
HP AB / HC AB version
Versione HC LL version
27
71
17
M5
M 5
30
100.6
81
7
49
12
22.5
27
71
17
M5
16.5
M5
30
100.6
81
7
49
12
22.5
8.9
31.4
Ø12
27
71
17
M5
M 5
30
100.6
81
M 12 x1
10.5
7
49
12
22.5
71
50
M5
M5
17
81
100.6
30
14
21
12
22.5
79
6.5
M5
M5
35
27
21
45
65
7
44.5
12
22.5