Futaba Hendheld RC 2.4 GHz No. of channels: 14 1-F8075 Datenbogen

  When setting a rate selection switch, move 

the cursor to the switch item and touch the 

RTN button to access the selection screen. 

Select the switch and set its ON direction. 

(Always ON at "--" setting)

*For a description of the switch selection method, see the 

description at the back of this manual.

  Move the cursor to the gyro type selection 

item and touch the RTN button to switch to 

the data input mode. Select the gyro type 

by scrolling the touch sensor. 

  [GY]: When a Futaba GYA gyro is used
  [NORM]: When using something other than 

Futaba GYA gyro is used.

  Touch the RTN button to change the gyro 

type and return to the cursor mode.

*When a Futaba GYA gyro is used and [GY] type is selected, 

the sensitivity set value is directly read in both the AVCS 

and NORM modes.

  Move the cursor to the operation mode 

selection item and touch the RTN button 

to switch to the data input mode. Select 

the operation mode by scrolling the touch 

sensor. 

  [AVCS]: AVCS mode
  [NORM]: Normal mode
  Touch the RTN button to change the 

operation mode and return to the cursor 

mode.

 

  Move the cursor to the sensitivity icon and 

touch the RTN button to switch to the data 

input mode. 

  Adjust the  sensitivity by scrolling the touch 

sensor. 

  Initial value: 0%
  Adjustment range: 0~100%

*When the RTN button is touched for one second, the 

sensitivity is reset to the initial value.)

  Touch the RTN button to return to the cursor 

mode.

● Wing type: Aileron 2 servos mounted fuselage selected

● Set Gyro 1 (GYA431AIL): CH5, Gyro 2 (GYA431ELE): CH7, Gyro 3 (GYA430RUD): CH8 at 

the Function menu of the Linkage menu.

●  Rate 1 [OFF][GY][SE][NORM][60%][NORM][60%][NORM][60%]

  Rate 2 [INH]

  Rate 3 [OFF][GY][SE][AVCS][60%][AVCS][60%][AVCS][60%]

*Set so that Rate 1 is turned on at the back position of switch E and Rate 3 is turned ON at the front 

position. Since switch E is turned OFF at the center, Rate 2 remains [INH].

S.BUS/S.BUS2 port

*When a S.BUS port is used 

R7008SB CH Mode is set to 

ModeB [D]. 

GAIN 0％

AVCS

NORMAL

When AVCS is used we 

recommend that the 

sensitivity CH be set to 

the 3-position.