ABUS 2-Zone alarm system Conrad Alarm zones 2 Conrad Datenbogen

ACTIVATED

a) When alarm zone 2 triggers, the system issues

short signal sounds by the internal signalling
device while the entry delay is active.

b) The alarm system emits a short signal sound

after the end of the exit delay and arming of the
alarm zones.

DEACTIVATED Insert jumper B to position 2 to deactivate the sig-

nal sounds.

The relay  con- After an alarm case, the relay contact remains tact

remains 

until the alarm is 

closed

reset (for this, the mode selection switch at the
front must be set to “OFF”).
12V/DC are applied to the connection terminals 6
and 7.

The relay con-  After an alarm case, the relay contact remains 

tact remains 

closed for about 3 minutes until the alarm is 

closed for about reset (for this, the mode selection switch at the
3 minutes

front must be set to “OFF”)..
12V/DC are applied to the connection terminals 6
and 7.

1 2

C

1 2

C

B

1 2

B

1 2

34