ONKYO TX-8020 18217S Benutzerhandbuch

En-

13

On the receiver, the factory default for speaker impedance is “6

Ω”. If you need to change the speaker impedance setting, 

read “Speaker Connection Precautions” on page 11 carefully before performing the procedure below.

Note:
Be sure to minimize the volume level on the receiver 
before configuring the speaker impedance.

Press the [] button to turn on the power.

Use the arrow []/[] buttons to select 
“SP Impedance,” and then press [ENTER].

Ω” using 

the arrow []/[] buttons.

If you want to change the impedance setting back 
to the factory default setting of 6

Ω, follow the 

same procedure described above.

Notes:
• This procedure can also be performed on the receiver 

by using [SETUP], TUNING []/[], PRESET 
[]/[], and [ENTER].

• Press [RETURN] to return to the previous menu.
• This procedure will be cancelled if the [SETUP] 

button is pressed before step 5.

Setting example:
If you’re using only one of the speaker sets connected to 
SPEAKERS A or B, choose the 4

Ω setting if each 

speaker’s impedance is 4

Ω to less than 6 Ω, or choose 

the 6

Ω setting if each speaker’s impedance is 6 Ω or 

more.

If you’re using both of the speaker sets connected to 
SPEAKERS A and B, choose the 4

Ω setting if each 

speaker’s impedance is 8 to 16

Ω.



   