Saeco Super-automatic espresso machine HD8750/18 HD8750/18 Datenbogen

13

 Press the “

” button to start the cycle. The machine starts the 

automatic priming of the circuit by dispensing some water through the 
Classic Milk Frother.

 When the process is complete, the“

” and “

” buttons will blink. 

The machine is in the warm-up mode.

When warm-up is completed, the machine automatically performs a rinse/
self-cleaning cycle of the internal circuits with fresh water. This takes less 
than a minute. 
 

 Place a container under the dispensing spout to catch the small 

amount of dispensed water. 

 The "

" and "

" buttons blink during the entire process. 

 Wait for the cycle to fi nish automatically.

 Note: 

You can stop the dispensing process by pressing either the "

" or the "

" 

button.

 When the above steps are complete, check that the “

“, "

", "

" and 

"

" buttons are lit.