Saeco Super-automatic espresso machine HD8750/18 HD8750/18 Datenbogen

14

During this process a coff ee is brewed and fresh water fl ows through the 
steam/hot water circuit. This takes a few minutes.

 Place a container under the dispensing spout.

 Check that the “

”, “

”, “

” and “

” lights blink permanently.

 Press the “

” button. The machine starts dispensing water.

 When the dispensing has fi nished, empty the container.

 

Repeat the operations from step 1 to step 3 twice, then continue with 
step 5.

 Insert a container under the Classic Milk Frother.

 Press the “

” button to start dispensing hot water.

 Dispense water until the no water light "

" is permanently on.

 At the end, fi ll the water tank again up to the MAX level. Now the 

machine is ready for coff ee brewing.

 Note: 

If the machine has not been used for at least two weeks, it will 
automatically perform an automatic rinse/self-cleaning cycle. Following 
this, you need to initiate a manual rinse cycle as described above.

The automatic rinse/self-cleaning cycle also starts automatically when 
the machine has been in stand-by mode or turned off  for more than 15 
minutes.
At the end of the cycle, it is possible to brew a coff ee.