VIVOTEK Vivotek Network Router ND4801 Benutzerhandbuch

 

 

1. Connect network cameras to the NVR’s LAN ports. 

2. If you want to access NVR over the Internet, connect the NVR to the Internet via the WAN 

port. A web console can be established from a remote PC by keying http://<public IP>:3454 in 

a browser’s URL address field. However, port forwarding on the router for the TCP port will be 

necessary. 

3. Flip the power switch (at the rear of chassis) to the ON position, and push the power button 

to run the NVR.

0
1

Router 

Internet

Router 

Default Fixed IP:

192.168.1.10

LAN

WAN

Switch

Router / Wireless AP 

Clients

The LAN and WAN ports can be configured into the same or different subnets. 

If you have cameras connected via the WAN port, make sure the WAN port acquires an IP 

address from a DHCP server on router or AP. If not, the cameras detected through the WAN port 

will use the default IPs, e.g., 169.254.xx.xx, and the LiveClient software will not be able to detect 

their presence.  

Default: DHCP