HP Performance Optimized Data Center (POD) 20cp Installationsanleitung
Power management 17
Power management
Connection requirements
When determining the final location of your power and water connections, consider the distance between
the facility utilities and the HP POD.
The facility power connection must be installed in compliance with local electrical codes and regulations.
HP can provide engineering services to develop the site installation plan and drawings as a supplemental
service.
the facility utilities and the HP POD.
The facility power connection must be installed in compliance with local electrical codes and regulations.
HP can provide engineering services to develop the site installation plan and drawings as a supplemental
service.
Power requirements
The HP POD is available in North American and International models. Both models provide 145 kW
redundant or 290 kW non redundant power for the critical load.
redundant or 290 kW non redundant power for the critical load.
•
The North American HP POD includes step-down isolation transformers and requires two 400A,
480V, 3-phase delta feeds at 50-60 Hz.
480V, 3-phase delta feeds at 50-60 Hz.
•
The International HP POD does not require transformers and requires two 400A, 380-415V, 3-phase
wye feeds at 50-60 Hz. All 3-phase HP POD feeders require that the neutrals and the equipment
grounding conductors remain isolated. Bonding of the two conductors is allowed at the power
source only.
wye feeds at 50-60 Hz. All 3-phase HP POD feeders require that the neutrals and the equipment
grounding conductors remain isolated. Bonding of the two conductors is allowed at the power
source only.
For higher density loads that require more power capacity, both 400A inputs can be fed from the same
source. When a lower density critical load is used, N+N redundancy can be accomplished by connecting
the two 400A feeds to independent sources.
source. When a lower density critical load is used, N+N redundancy can be accomplished by connecting
the two 400A feeds to independent sources.
Main input power