Panasonic Arbitrator 360 Bedienungsanleitung
87
Administrator Operations on the Remote Control Panel (separately sold)
Administrator Setup
(continued)
Auto Maintenance
During continuous operation, the
Memory Card Video Recorder restarts,
checks files and frees memory at regular
intervals to maintain system health.
When the unit is regularly turned off,
auto maintenance is not required.
To use the unit without having to
regularly power it off, activate auto
maintenance with intervals as short as
possible.
A dialog announcing the start of auto
maintenance appears 10 to 20 seconds
before start of maintenance. In this
interval, you can use the [CONTROL
PANEL ON/OFF], [REC], [STOP],
[RETURN] or [
Memory Card Video Recorder restarts,
checks files and frees memory at regular
intervals to maintain system health.
When the unit is regularly turned off,
auto maintenance is not required.
To use the unit without having to
regularly power it off, activate auto
maintenance with intervals as short as
possible.
A dialog announcing the start of auto
maintenance appears 10 to 20 seconds
before start of maintenance. In this
interval, you can use the [CONTROL
PANEL ON/OFF], [REC], [STOP],
[RETURN] or [
] buttons to cancel
maintenance. Auto maintenance starts
unless it is canceled.
unless it is canceled.
Auto maintenance is started or
canceled when planned maintenance
date and time is reached under the
following conditions.
canceled when planned maintenance
date and time is reached under the
following conditions.
< Execution >
• When recording stops
• Maintenance is held for a maximum
• Maintenance is held for a maximum
of 90 minutes and recording is
stopped in that interval.
stopped in that interval.
• When intermittent recording
is performed at a time other
than programmed recording
(intermittent recording stops and
maintenance starts)
than programmed recording
(intermittent recording stops and
maintenance starts)
• During file restore operation and
when Administrator Setup is
performed (maintenance starts
when respective process ends)
performed (maintenance starts
when respective process ends)
• During playback (maintenance
starts when playback ends)
< Cancel >
• When recording continues beyond
90 minutes
• When the P2 card slot cover is open
Notes:
• To start recording immediately after
the end of auto maintenance, set
power ON recording to “ON”.
power ON recording to “ON”.
• When auto maintenance is completed,
the unit is restarted and left in the
power on state. Set the following
items to “LAST” in Administrator
Setup when auto maintenance
is set to “ON”, to prevent a restart
from changing the settings used
before power was last turned off.
Set a value other than “LAST” to set
a fixed value.
power on state. Set the following
items to “LAST” in Administrator
Setup when auto maintenance
is set to “ON”, to prevent a restart
from changing the settings used
before power was last turned off.
Set a value other than “LAST” to set
a fixed value.
< Rec/Play >
• Init Camera Select
• Init Audio2 In Select
• Init Audio2 Rec
• Init On Screen Type
• Init Audio Out (Play)
• Init Audio2 In Select
• Init Audio2 Rec
• Init On Screen Type
• Init Audio Out (Play)
< Camera >
• Init Backlight
• Init AE Shift
• Init Camera LED
• Init IR Mode
• Init AE Shift
• Init Camera LED
• Init IR Mode