Primera Technology Network Disc Duplication & Printing System Benutzerhandbuch

Setup

This section will describe the step-by-step process of setting 

up your unit. This includes information on how to load the

supplies (ink and disc media) necessary to start producing

discs.

A. HARDWARE SETUP

Step 1: Applying Power

• Locate the power cord supplied with the unit. 
• Place one end of the power cord into the plug on the back

of the unit and

the other end

into a surge

protected 

outlet.

• Turn on the

power switch

located on the

back of the

unit above 

the fan.

• Unit will initialize for approximately 60 seconds.

Step 2: Installing Ink Cartridges

• Using the LCD Control Panel access the Main Menu of the

XRn by pressing the         button. 

Choose "Install Cartridges"

• Using the key provided, open the front cover of the unit.

The cartridge carrier will move to the 

load position. 

• Open the ink cartridge covers.
• Remove the ink cartridge from its 

packaging. 

• Slowly remove the tape covering the cartridge's print head,

being careful to avoid damaging the barcode label on the

underside of the cartridge. 

Power Switch

510991.qxd  6/15/2007  10:07 AM  Page 6