Primera Technology Network Disc Duplication & Printing System Benutzerhandbuch

Hardware and Software Setup

• Insert the ink cartridges into the carrier, copper end first

and snap the cartridge cover in place. Insert the color in

the left holder, monochrome black in the right cartridge

holder.

• Close and lock the unit’s front cover.

Note: The unit will not function unless the front cover is closed and

locked! Both LED lights inside the cover will be lit when the

cover is locked and closed.

Finally, you must tell the XRn which cartridge was installed by

selecting it using the LCD Control Panel. Choose new color,

new black, new color and black or used cartridge. Choose

used cartridge if you have installed the same cartridges.

Choosing used cartridge will retain the current ink level

values. Choosing new cartridge will reset the appropriate

ink level(s) to 100%.

Step 3: Loading Media (Discs)

NOTE: Your Printer can print directly onto virtually any brand of printable-

surface CD/DVD media. However, different brands of discs have

different printable coatings. Because of this, you may need to adjust

the printer driver settings to accommodate your specific brand of

CD/DVD media. Refer to Section 4 for further printer driver

information.
For maximum

print quality

, use CD/DVD media authorized by

Primera.

Refer to the following steps

when loading discs in to

the unit:

• Using the key provided,

open the front cover of

the unit.

1. Push in
2. Lift Up

Color

Black

510991.qxd 6/15/2007 10:07 AM Page 7

TOC

INDEX