Hayward Pools Marine Sanitation System 2100 Benutzerhandbuch

3

UP BUTTON- Used in conjunction with Program

button for many automatic settings, including fill

valve operation (if installed). 1-2 hour time out.

DOWN BUTTON- Displays Ph and/or ORP

and/or PSI with each press (if installed). Used in

conjunction with Program button.

PROGRAM BUTTON- Used when setting

automatic features and water temperatures and

fill features.
FILTER BUTTON- Turns the filter pump on

and off, 4 hour time out.  NOTE:  If the filter

pump is 2-speed: the sequence is low, high,

off. When the filter program is engaged, the

low speed pump will run. When Aux 1 is a

cleaner pump, it will automatically engage the

high-speed filter pump. It will always run in

high speed when calling for heat.

LIGHT BUTTON- Switches the light(s) between

high, medium, and low intensity on 120V

systems only.  Turns light(s) on/off on low

voltage lighting system.  12 hour time out.

AUXILIARY BUTTON - turns the spa auxiliary on and off, 2 hour time out. If blower feature is enabled,

sequence is: Spa Aux, Blower, Spa Aux and Blower, Off.

TEMP BUTTON - controls the set temperature of the spa.

A. Press the temp button once to display the temperature previously set.This display will revert back to the current

air/water temperature. 

B. Pressing the temp button again will cause the temperature setting to increase or decrease depending on what

direction was last chosen. Each press to follow will change the temperature in the same direction.

C. If the opposite direction is desired, release the button and allow display to cycle back to current air/water

temperature. 

D. Press temp button again to display the temperature set. Press temp button again to change temperature setting

in desired direction.

SPA BUTTON - switches the valve between spa and pool, 24 hour time out when in the spa position, turns the

filter pump on in the spa position.

LIGHT BUTTON - switches the light(s) between high, medium, and low intensity on 120V systems

only.  Turns light ON/OFF on low voltage systems. 12 hour time out.

SPA BUTTON- Switches the valve between spa

and pool, 24 hour time out when in Spa position,

turns the filter pump on in the spa position. Filter

pump will turn off when valves are turning.

HEATER BUTTON- Enables/Disables Heat 

Seek feature. 
NOTE:  Heater Cool Down Feature - 

The pump will stay on after the heater turns off

for a 10-minute cool down period. This safety

feature also extends the life of the heater.

NOTE:  Heat Seek Feature (temp polling) -

Once the set temp has been realized, the heater

will go into sleep mode.  Every hour the pump

will turn on for 5 minutes to register the

temperature. If it is 2 degrees below the set

temp, the heater will enable.  If the temp has not

dropped below 2 degrees of the set temp, the

system will go back into sleep mode.

AUXILIARY 1 -  6A max  

A. Turns the pool feature on and off. Will not 

activate filter pump if dip switch #4 is down.

B. Controls the cleaner pump in conjunction 

with the filter pump if dip switch #4 is in the 

up position. 

C. If dip switch #4 is in the up position and the 

filter pump is running when the Aux 1 button 

is pushed, the cleaner pump comes on 

immediately. 

D. If the filter pump is not running when the 

Aux 1 button is pushed, the cleaner pump 

will delay for 4 minutes before it comes on; 

24 hour time out. 

E. Auxiliary 1 disabled in spa mode if dip switch

#4 is in the up position.

Turns the feature on and off; 12 hour time out.

Turns the feature on and off; 24 hour time out.

Filter pump turns on with feature.

(If in Spa Mode - valves switch to Pool Mode)

Turns auxiliary 5 output on the expander board

on and off.  12 hour time out.

A.  Controls the optional pool lighting circuit. 

The 1st press turns on the light. 

B.  The button is pressed again AFTER 5 

SECONDS, the light turns off. 

C.  If the button is pressed again BEFORE 5 

SECONDS, the Aux 4 option will operate. 

D.  The next press stops the Aux 4 option and 

the next turns the light off. 12 hour time out.

The 1st press turns the light on. The 2nd press

turns the light off; 12 hour time out.