Havis-Shields Universal Telescoping Computer Base C-TCB-14 Merkblatt
C-TCB-14_INST_8-07
INSTALL INSTRUCTIONS C-TCB-14
UNIVERSAL TELESCOPING COMPUTER BASE
TOOLS REQUIRED:
3/16” Allen wrench
Ratcheting Wrench
Standard Socket Set
Ratcheting Wrench
Standard Socket Set
Powered Drill (if necessary)
Drill Bit Set (if necessary)
Drill Bit Set (if necessary)
HARDWARE:
QTY DESCRIPTION PART
QTY DESCRIPTION PART
#
1
Pole support assembly
CM93071-14W
1
Telescoping pole assembly
CM93072-14
4
¼-20 Nylock nut
GSM30016
4
¼” Flat washer
GSM31005
4
¼ - 20 x ½” Hex head bolt
GSM33000
Always
!
Read all instructions before installing any Havis-Shields Equipment Corp products.
Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
Use hardware provided with install kit
Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
Use hardware provided with install kit
SUB ASSEMBLY:
1. Confirm receipt of all hardware and components.
2. C-TCB-14 offers multiple mounting options.
2. C-TCB-14 offers multiple mounting options.
a. Havis Shields extruded Trak Mount
b. Any flat surface with access to bolt.
b. Any flat surface with access to bolt.
3. Mounting option to be determined by installer.
Pole support
assembly
¼-20 x ½” Hex head
bolts, washers & hex
nuts
Location to mount to
Trak or flat surface
Telescoping pole
assembly