Havis-Shields Universal Telescoping Computer Base C-TCB-14 Merkblatt
C-TCB-14_INST_8-07
INSTALLATION:
1. Mount C-TCB-14 to Havis-Shields Trak Mount:
• Mount console, transmission hump bracket(s), and Trak mount being sure to leave
room for C-TCB-14
• Slide (4) ¼-20 x ½” Hex head bolts, (2) in each rail.
• Place Pole support assembly so slots line up with hex head bolts on Trak mount.
• Secure with ¼” Flat washers and nylock nuts.
• Secure with ¼” Flat washers and nylock nuts.
• Attach optional C-3090 Computer mounting platform to Telescoping pole assembly.
Note: It is recommended to leave all components loose on Trak until exact positioning is determined.
2. Mount C-TCB-14 to flat surface:
• Exact location to be determined by installer.
• Position C-TCB-14 on floor or other flat surface in vehicle.
• Mark and drill ¼” holes.
• Bolt using ¼-20 x ½” Hex head bolts, washers and nylock nuts.
• Bolt using ¼-20 x ½” Hex head bolts, washers and nylock nuts.
• Attach optional C-3090 Computer mounting platform to Telescoping pole assembly.