Brother PE-150V Anleitung Für Quick Setup
KNOWING YOUR SEWING MACHINE ——————————————————————————————————————————————
10
3
Put a different presser foot on the needle plate
so that the bar on the presser foot is in line
with the slot on the shank.
so that the bar on the presser foot is in line
with the slot on the shank.
4
Lower the presser foot lever and fix the
presser foot onto the shank. If the presser foot
is in the correct place, the bar should snap in.
presser foot onto the shank. If the presser foot
is in the correct place, the bar should snap in.
1 Shank
■ Presser Foot Installation Orientation
Flat Bed Attachment
The accessories are stored in a compartment inside
the flat bed attachment.
the flat bed attachment.
1
Slide the flat bed attachment to the left to
open it.
open it.
1 Flat bed attachment
2 Storage compartment
2 Storage compartment
Note
● Put the accessories inside a bag, and then
store the bag inside the compartment. If the
accessories are not in a bag, they may fall
out and be lost or damaged.
accessories are not in a bag, they may fall
out and be lost or damaged.
Using a Free-arm Style
Free-arm sewing is convenient for sewing tubular
and hard-to-reach areas. To change your machine to
the free-arm style, lift out the flat bed attachment.
and hard-to-reach areas. To change your machine to
the free-arm style, lift out the flat bed attachment.
1
Slide the flat bed attachment to the left to
release it.
release it.
1 Flat bed attachment
●
If the presser foot is not installed with the
correct orientation, the needle may strike
the presser foot, which may bend or
break the needle and cause injury.
correct orientation, the needle may strike
the presser foot, which may bend or
break the needle and cause injury.
1
CAUTION
1
2
1
XL2600.book Page 10 Thursday, November 4, 2004 9:46 PM