Brother P-TOUCH QL-560 Benutzerhandbuch

4

„

Power Cord 

Use only the authorized power source 

(220 - 240 V AC) for the printer.
Use only the power cord included with 

the printer.
Do not handle the power cord or plug if 

your hands are wet.
Do not overload the power outlet socket 

with too many appliances or insert the 

power cord into a damaged outlet 

socket.

Do not cut, damage, alter or place heavy 

objects on the power cord.
Do not use the power cord if it is 

damaged. 
Ensure the power plug is correctly 

inserted into the power outlet. 
If the printer will not be used for an 

extended period, remove the power 

supply cord from the electrical outlet.

Caution

„

The Printer

The standard electrical outlet should be close to the printer and be easily accessible.

„

Power Cord

Always hold the power plug when removing the power cord from or inserting it into the 

outlet. Pulling on the power cord cable could cause problems with the power cord.

„

Cutter 

Do not touch the blade of the cutter unit. 
Do not open the top cover when the 

cutter is operating.
Do not apply excessive pressure to the 

cutter unit.

„

Installation/Storage 

Place the printer on a flat, stable surface 

such as a desk.

Do not place any heavy objects on top of 

the printer. 

„

DK Roll (DK Label, DK Tape)

Be careful not to drop the DK Roll. 
DK Rolls use thermal paper and thermal 

film. Both the label and print will fade 

with sunlight and heat. Do not use DK 

Rolls for outdoor use that requires 

durability. 

Depending on the location, material, and 

environmental conditions, the label may 

unpeel or become irremovable, the 

colour of the label may change or be 

transferred to other objects. 

Before applying the label, check the 

environmental condition and the 

material. Test the label by affixing a 

small piece of it to an inconspicuous 

area of the intended surface.

Warning