GE General Electric Oxygen Equipment PT878 Benutzerhandbuch
Chapter 8. Servicing the PT878
198
Transport® Model PT878 Portable Liquid Flowmeter User’s Manual
8.12.2a Setting up the PC
Note:
The use of Hyperterminal is shown here as an example. If you are
using a different communications software, see its manual for
detailed instructions.
using a different communications software, see its manual for
detailed instructions.
1.
From the Start Menu, click Programs/Accessories/Hyperterminal to
open the Hyperterminal window.
open the Hyperterminal window.
2.
If the call is not connected, click on Connect from the Call menu in
Hyperterminal.
Hyperterminal.
3.
From the File menu, click Properties. Be sure the New Connection
Properties window is set to your virtual infrared port.
Properties window is set to your virtual infrared port.
Note:
You can determine which virtual port your infrared is using by
opening Infrared Monitor in the Control Panel and clicking on the
Options tab.It displays the message, “Providing Application Support
on:” and lists the virtual infrared port, as shown in Figure 132
below.
opening Infrared Monitor in the Control Panel and clicking on the
Options tab.It displays the message, “Providing Application Support
on:” and lists the virtual infrared port, as shown in Figure 132
below.
Figure 132: Port Settings for COMM 4