GE General Electric Oxygen Equipment PT878 Benutzerhandbuch
Chapter 8. Servicing the PT878
196
Transport® Model PT878 Portable Liquid Flowmeter User’s Manual
8.12.1 Updating Software Via IrOBEX
To begin updating software via IrOBEX, scroll down to the Flash Update
entry in the Service Menu and press
entry in the Service Menu and press
[ENTER]
. The screen appears similar to
Figure 130 below.
Figure 130: Flash Update Window
•
Press
[F2]
(Cancel) to return to Operate Mode without erasing the
program.
•
Press
[F3]
(OK) to confirm that you wish to erase the program.
4.
The meter asks for confirmation. Repeat the options shown in Step 1
above. After the PT878 reboots, the screen appears similar to
Figure 131 below.
above. After the PT878 reboots, the screen appears similar to
Figure 131 below.
Figure 131: Flash Reloading Window
Update Flash
OK
--WARNING--
This will erase the
instrumentation coding.
This will erase the
instrumentation coding.
Choose ‘Cancel’ to exit or ‘OK’
to continue.
to continue.
Cancel
Panametrics PCI Loader v3.0 2/26/02
[HW Rev3+]
Reload Flash via Infrared (Yes/No)?
Backup Battery: OK
Firmware CRC: Valid
IrOBEX No IrCOMM