Bosch Appliances Home Security System D7412G Benutzerhandbuch

D9412G/D7412G | Program Entry Guide | 2.0 9000MAIN

EN | 51

Bosch Security Systems | 1/04 | 47775E

Default:

See 

Program Record Sheet

Selection:

Sixteen alphanumeric characters

Enter the text that displays when all areas sharing
the same account number are master armed. The

ACCT IS ON

 text appears at all command centers

assigned to these areas, if more than one area has the
same account number. The 

ACCT IS ON

 text also

appears if only one area in the system is used. See
the prompts 

CC# Area Assign

 and 

Area # Acct Is

On

 in Section 2.10.1 Cmd Cntr (Command Center)

Assignment. When all areas in the account are master
armed, the 

Area # Is On

 text is replaced by the

ACCT IS ON

 text if the area is armed before all the

areas with the same account number.

0101
0101
0101

A blank entry disables the 

ACCT IS ON

display for this area, allowing an account
wide area to display the 

AREA # IS ON

text instead of the 

ACCT IS ON

 text.

Each area can have unique 

ACCT IS ON

text, or you can program the same text in
each area of the account so when all the
areas in the account are armed, they all
show the same text.

0101
0101
0101

Although it is not programmed in this area,
the new D1260 Alpha V Command Center
can display up to sixteen characters for an
Area Name on line 1 of its display. The
Area Text (Area # Is Off, Area # Not
Ready, Area # Is On, and Acct # Is On)
programmed in this module appears on line
2 of the D1260 Alpha V Command Center.
When programming custom text, it should
be logical to users viewing it on the
D1260. For example, the Area Name Text
can be programmed to display 

Front

Office

 and the Area # Is Off text

(programmed in this section) could be
programmed to display 

Ready To Arm

.

The D1260 would then show on line 1

Front Office

 and on line 2, 

Ready To

Arm

.

2.10.3

Custom Function

Custom functions are a way to simplify use of
complex keystroke sequences entered at the
command center. These items are similar to speed
dialing on a telephone. A custom function can
automatically initiate an end user request by pressing
[ENTER] once the custom function text is displayed
on the command center. You can have up to sixteen
custom functions and restrict the use of these by area
and authority level.

Each 

Custom Function ###

 item has sixteen

characters of programmable text (

CF### Text

).

When the Custom Function is assigned to the menu

M## Function

 (see Section 2.12 Function List) the

user can press [PREV] or [NEXT] to scroll to

CF### Text

. The user accesses the menu by

pressing [MENU] on the command center.

The user needs the appropriate authority level
enabled for the 

L## C Function

 

128 to 143

 in

Section 2.11 User Interface, to use the custom function.

Consider the scope of the command center used to
access the Custom Function. Each Custom Function
is enabled in the function menu by 

M# CC Address

1 [through 8

]. If the Custom Function is not

assigned to a specific command center address, it
does not appear in the menu.

Default:

128

Selection:

128 to 143

Enter the Custom Function number you want to
program. You can program up to sixteen Custom
Functions, which are numbered 128 to 143.

Default:

See 

Program Record Sheet

Selection:

Sixteen alphanumeric characters.
See 

Section 2.10.2 Area Text

 for

valid character entries.

Determines the menu text displayed at the
command center for the custom function item. Use
this text to represent the functions performed by this
menu item.