Whirlpool TGS325KQ2 Benutzerhandbuch

Seite von 16
12
Prepare Oven:
■ 
Remove the broiler pan, grid, cookware and bakeware and, 
on some models, the temperature probe from the oven.
■ 
Remove any foil from the oven because it may burn or melt, 
damaging the oven.
■ 
Remove oven racks to keep them shiny and easy to slide. 
See “General Cleaning” section for more information.
■ 
Hand clean inside door edge and the 1½ in. (3.8 cm) area 
around the inside oven cavity frame, being careful not to 
move or bend the gasket. This area does not get hot enough 
during self-cleaning to remove soil. Do not let water, cleaner, 
etc. enter slots on door frame. Use a damp cloth to clean this 
area.
■ 
Wipe out any loose soil to reduce smoke and avoid damage. 
At high temperatures, foods react with porcelain. Staining, 
etching, pitting or faint white spots can result. This will not 
affect cooking performance.
Prepare Cooktop and Storage Drawer:
■ 
Remove plastic items from the cooktop because they may 
melt.
■ 
Remove all items from the storage drawer.
How the Cycle Works
IMPORTANT:
 The heating and cooling of porcelain on steel in the 
oven may result in discoloring, loss of gloss, hairline cracks and 
popping sounds.
The Self-Cleaning cycle uses very high temperatures, burning soil 
to a powdery ash. 
The oven is preset for a 3
 hour 30 minute clean cycle, but the 
time can be changed. Suggested clean times are 2 hours 30 
minutes for light soil and between 3
 hours 30 minutes to 4 hours 
30 minutes for average to heavy soil. 
Once the oven has completely cooled, remove ash with a damp 
cloth. Do not wipe down any of the inside surfaces until the oven 
has completely cooled down. Applying a cool, damp cloth to the 
inner door glass before it has cooled completely could result in 
the glass breaking.
The oven light will not work during the Self-Cleaning cycle.
To Self-Clean:
Before self-cleaning, make sure the door is closed completely or 
it will not lock and the cycle will not begin. 
1.
Press AUTO CLEAN.
2.
Press the TEMP/TIME “up” or “down” arrow pad to set a 
clean time other than 3
 hours 30 minutes. The clean time can 
be set between 2 hours 30 minutes
 and 4 hours 30 minutes. 
3.
Press START/ENTER.
The oven door will automatically lock. The ON and 
DOOR LOCKED oven indicator lights will light up. The door 
will not unlock until the oven cools.
When the cycle is complete and the oven cools, “End” will 
appear on the oven display and the oven indicator lights will 
go off.
4.
Press OFF/CANCEL to clear the oven display.
To Stop Self-Clean any time:
Press OFF. If the oven temperature is too high, the door will 
remain locked. It will not unlock until the oven cools.
General Cleaning
IMPORTANT:
 Before cleaning, make sure all controls are off and 
the oven and cooktop are cool. Always follow label instructions 
on cleaning products.
Soap, water and a soft cloth or sponge are suggested first unless 
otherwise noted.
EXTERIOR PORCELAIN ENAMEL SURFACES
(on some models)
Food spills containing acids, such as vinegar and tomato, should 
be cleaned as soon as the entire appliance is cool. These spills 
may affect the finish.
■ 
Glass cleaner, mild liquid cleaner or nonabrasive scrubbing 
pad: Gently clean around the model and serial number plate 
because scrubbing may remove numbers.
STAINLESS STEEL 
(on some models)
Do not use soap-filled scouring pads, abrasive cleaners, Cooktop 
Polishing Creme, steel-wool pads, gritty washcloths or some 
paper towels. Damage may occur.
Rub in direction of grain to avoid damaging.
■ 
Stainless Steel Cleaner & Polish (not included): See 
“Assistance or Service” section to order.
■ 
Liquid detergent or all-purpose cleaner: Rinse with clean 
water and dry with soft, lint-free cloth.
■ 
Vinegar for hard water spots
PORCELAIN-COATED GRATES AND CAPS
Food spills containing acids, such as vinegar and tomato, should 
be cleaned as soon as the cooktop, grates and caps are cool. 
These spills may affect the finish.
To avoid chipping, do not bang grates and caps against each 
other or hard surfaces such as cast iron cookware.
Do not reassemble caps on burners while wet.
Do not clean in the Self-Cleaning cycle.
■ 
Nonabrasive plastic scrubbing pad and mildly abrasive 
cleanser: Clean as soon as cooktop, grates and caps are 
cool.
■ 
Dishwasher (grates only, not caps): Use the most aggressive 
cycle.
SURFACE BURNERS
Sealed Burner models
See “Sealed Surface Burners” section.
COOKTOP CONTROLS
Do not use steel wool, abrasive cleansers or oven cleaner.
Do not soak knobs.
When replacing knobs, make sure knobs are in the OFF position.
On some models, do not remove seals under knobs.
■ 
Soap and water or dishwasher: Pull knobs straight away from 
control panel to remove.