Whirlpool TGS325KQ2 Benutzerhandbuch

Do not use abrasive cleaners, steel-wool pads, gritty washcloths 
or some paper towels. Damage may occur.

■

Glass cleaner and soft cloth or sponge: Apply glass cleaner 
to soft cloth or sponge, not directly on panel.

■

Glass cleaner and paper towels or nonabrasive plastic 
scrubbing pad: Apply glass cleaner to soft cloth or sponge, 
not directly on panel.

Do not use oven cleaners.

Food spills should be cleaned when oven cools. At high 
temperatures, foods react with porcelain and staining, etching, 
pitting or faint white spots can result.

■

Self-Cleaning cycle: See “Self-Cleaning Cycle” first.

■

Self-Cleaning cycle: See “Self-Cleaning Cycle” first. Remove 
racks or they will discolor and become harder to slide. If this 
happens, a light coating of vegetable oil applied to the rack 
guides will help them slide.

■

Steel-wool pad

Do not clean in the Self-Cleaning cycle.

■

Mildly abrasive cleanser: Scrub with wet scouring pad.

■

Solution of 

¹₂ cup (125 mL) ammonia to 1 gal. (3.75 L) water: 

Soak for 20 minutes, then scrub with scouring or steel-wool 
pad.

■

Oven cleaner: Follow product label instructions.

■

Dishwasher

 (on some models)

Make sure drawer is cool and empty before cleaning.

For more information, see “Storage Drawer” section.

■

Mild detergent

The oven light is a standard 40-watt appliance bulb. It will come 
on when the oven door is open. It will not work during the Self-
Cleaning cycle. On some models, when the oven door is closed, 
press OVEN LIGHT to turn it on or off.

Before replacing, make sure the oven and cooktop are cool and 
the control knobs are in the off position.

Unplug range or disconnect power.

Turn the glass bulb cover in the back of the oven 
counterclockwise to remove.

Turn bulb counterclockwise to remove from socket.

Replace bulb and bulb cover by turning clockwise.

Plug in range or reconnect power.

For normal range use, it is not suggested to remove the oven 
door. However, if necessary, follow these instructions. The oven 
door is heavy.

Use a putty knife or screwdriver and insert it at the bottom 
corner of the door stop clip.

Pry door stop clip free and remove from front frame hinge 
slot. Take care not to scratch finish.

Repeat procedure for other door stop clip.

Open the oven door. Insert door removal pins, included with 
your range, into both hinge hangers. Do not remove the pins 
while the door is removed from the range.

Carefully close the door until it rests against the door removal 
pins.

Grasp the door on the sides with your fingers on the front of 
the door and your thumbs on the inside surface.