Whirlpool SF365PEG Benutzerhandbuch

CARING FOR YOUR RANGE

S

EALED SURFACE BURNERS AND COOKTOP

(

CONT

.

)

To clean the burners:

Pull the burner cap straight up from the 
burner base.

Clean the burner cap with warm, soapy water
and a sponge. You can also clean it with a 
mildly abrasive scrubbing pad or cleanser. 
Do not clean the burner cap in a dishwasher or
self-cleaning oven.

If the gas tube opening has become soiled or
clogged, use a cotton swab or a soft cloth to
clean the area.

straight pin. Do not
enlarge or distort the
port. Do not use a
wooden toothpick. If
the burner needs to be
adjusted, call a qualified
technician for service.

After cleaning the gas tube opening and ports, 

replace the burner cap.
To replace the burner 
cap, make sure the 
alignment pins on 
the burner cap are 
properly aligned with 
the burner base.

Turn on the burner to see if it will light. If the
burner does not light after you have cleaned
it, contact a designated service technician. Do
not service the sealed burner yourself.

For normal use of your range, you do not need to
remove the door. However, if you find it necessary
to remove the door, follow the instructions in this
section. 

NOTE: The oven door is heavy.

Use a putty knife or screwdriver and insert it at
the bottom corner of the door stop clip.

Pry door stop clip free and remove from front
frame hinge slot. Take care not to scratch 
porcelain.

Repeat procedure for other door stop clip.

R

EMOVING THE OVEN DOOR