Whirlpool SF365PEG Benutzerhandbuch

CARING FOR YOUR RANGE

R

EMOVING THE OVEN DOOR

(

CONT

.

)

T

HE OVEN LIGHT

Hold oven door so that the top edge of each
hinge hanger is horizontal. Insert hinge hangers
into the front frame hinge slots.

Tilt top of door toward range. Slide hinge 
hangers down onto front frame support pins.

NOTE: Make sure the hinge hangers are fully 
seated and engaged on the support pins.

Insert the door stop clip with the angular surface
at the top of the frame hinge slot, then push in
the bottom of the clip until flanges are flush with
the front frame.

Open the door completely and remove the door
removal pins. Save door removal pins for future
use.

Close the door.

The oven light will come on when you open the
oven door. 

To turn the light on or off when the oven door

is closed:

Push the oven light switch on the backguard.

To replace the oven light:

Unplug range or disconnect power.

Remove the glass bulb cover in the back of 

the oven by turning it
counterclockwise.

Remove the light bulb from its socket. Replace
the bulb with a 40-watt appliance bulb.

Replace the light bulb cover by turning it 

clockwise. 

Plug in range or reconnect power.

NOTE: The oven light will not work during the 
Self-Cleaning cycle.