Whirlpool RS386PXE Benutzerhandbuch
14
U S I N G Y O U R R A N G E
After the countdown is over, three short
tones will sound, followed by one tone that
sounds every 6 seconds until you press any
other command pad.
tones will sound, followed by one tone that
sounds every 6 seconds until you press any
other command pad.
To reset the Minute Timer:
Repeat Steps 1 and 2 on page 13.
To cancel the Minute Timer:
Press Timer On/Off pad until TIMER stops
flashing on the display (about 4 seconds).
flashing on the display (about 4 seconds).
Using the off/cancel pad
The Off/Cancel pad will cancel any function
except for the Clock and Timer functions.
When you press the Off/Cancel pad, the
display will show the time of day or, if
Minute Timer is also being used, the time
remaining.
except for the Clock and Timer functions.
When you press the Off/Cancel pad, the
display will show the time of day or, if
Minute Timer is also being used, the time
remaining.
Audible signals
Audible signals tell you if a function is
entered correctly or not. They also tell you
when a cycle is completed.
entered correctly or not. They also tell you
when a cycle is completed.
To shut off repeating end-of-timer
countdown signal:
countdown signal:
1.
Press and hold the Off/Cancel pad for
10 seconds.
10 seconds.
2.
A short tone will sound to tell you the
signal has been changed.
signal has been changed.
Repeat the above steps to turn the signal
back on.
back on.
ON/OFF
TIMER
CANCEL
OFF